FAQ

A water treatment system is designed to reduce unwanted physical, chemical, or microbiological contaminants in source water, making it suitable for a specific application. These systems can be used for drinking water production, industrial process water treatment, seawater desalination, and wastewater recycling.

The appropriate water treatment technology is selected based on source water characteristics and the required treated water quality.

Industrial water treatment systems are designed to meet the water quality and capacity requirements of manufacturing processes. Residential water treatment systems generally serve smaller-scale applications, such as drinking and domestic water supply for homes.

Industrial systems typically require more comprehensive evaluations of flow rates, conductivity, hardness, dissolved salts, automation, and operational continuity.

The selection of a water treatment system should be based on source water analysis, daily and hourly water demand, target treated water quality, and operating conditions.

Energy consumption, maintenance requirements, installation space, automation capabilities, and potential future capacity expansion should also be considered. The same treatment technology is not suitable for every water source.

Reverse osmosis (RO) is a membrane-based water treatment technology that reduces dissolved salts and various contaminants by forcing water through semi-permeable membranes under high pressure.

During this process, the feed water is separated into treated product water (permeate) and a concentrate stream containing higher concentrations of dissolved salts.

For more information, visit our Industrial Reverse Osmosis Systems page.

Reverse osmosis systems can be used for industrial process water production, drinking water treatment, seawater desalination, and wastewater recycling.

They may be applied in industries such as textiles, chemicals, food and beverage, maritime operations, and other manufacturing sectors where dissolved salt reduction is required.

Ultrafiltration (UF) primarily removes suspended solids and colloidal particles, while reverse osmosis (RO) reduces dissolved salts and certain other contaminants.

Ultrafiltration can be used as a pretreatment stage for reverse osmosis systems in suitable applications. The two technologies serve different treatment purposes and may be combined within the same water treatment system when necessary.

Yes. Drinking water can be produced from seawater by reducing dissolved salts through suitable treatment technologies, such as reverse osmosis, followed by the necessary post-treatment processes.

The suitability of the treated water for human consumption must be verified through chemical and microbiological analyses.

For more information about Rielli's solutions, visit our Seawater Desalination Plants page.

Seawater desalination systems can be used on ships, in hotels, tourism facilities, islands, coastal communities, and industrial facilities.

These systems are particularly valuable as an alternative water supply in regions where freshwater resources are limited.

System capacity is determined by evaluating daily product water demand, operating hours, source water salinity, and the required product water quality.

Water storage capacity, electrical infrastructure, and seawater intake conditions must also be considered during project design.

A Membrane Bioreactor (MBR) is a wastewater treatment technology that combines biological treatment with membrane filtration.

During biological treatment, biodegradable organic matter is removed, while the membranes separate treated water from biological sludge.

For technical details, visit our Membrane Bioreactor (MBR) Plants and Modules page.

MBR systems can be used for domestic and certain industrial wastewater treatment applications, grey water recycling, and suitable wastewater reuse projects.

They may also be considered for upgrading existing wastewater treatment plants or meeting additional treatment capacity requirements.

In MBR systems, treated water is separated from biological sludge using membrane filtration. In conventional activated sludge systems, this separation typically takes place in secondary settling tanks.

Membrane filtration can produce treated water with lower suspended solids concentrations. However, the suitability of each system depends on wastewater characteristics and operating conditions.

Ultrafiltration (UF) is a membrane filtration technology that reduces suspended solids, colloidal particles, and certain microorganisms in water.

It can be used for drinking water preparation, reverse osmosis pretreatment, industrial water treatment, and water recycling applications.

For available products, visit our Ultrafiltration Units and Modules page.

Ultrafiltration is not designed to remove dissolved salts from water. Its primary function is to separate suspended particles and colloidal substances through membrane filtration.

Applications requiring low conductivity or dissolved salt reduction should consider other treatment technologies, such as reverse osmosis.

Electrodeionization (EDI) is an advanced water purification technology that uses an electrical field and ion-exchange materials to increase the ionic purity of water.

It is generally used after reverse osmosis to remove residual dissolved ions.

For further information, visit our EDI Electrodeionization Systems page.

EDI systems can be used in industrial processes that require low-conductivity and high ionic purity water.

System design must consider feed water quality, target purity, and operating conditions. The suitability of EDI should be evaluated based on overall water quality requirements rather than conductivity targets alone.

Water softening systems primarily remove hardness-causing ions, such as calcium and magnesium. Demineralization systems are designed to achieve more comprehensive removal of dissolved ions from water.

Therefore, hardness removal and low-conductivity water production are not the same process.

For more information, visit our Water Softening and Demineralization Systems page.

Hard water can cause scale formation in pipelines, heat transfer surfaces, and various types of industrial equipment under certain conditions.

Scale deposits may reduce heat transfer efficiency, increase maintenance requirements, and negatively affect equipment operation.

The need for hardness control should be determined according to water characteristics and process requirements.

Grey water recycling involves treating and reusing wastewater collected separately from toilet wastewater, originating from showers, baths, and handwashing basins.

When the required water quality standards are met, treated grey water can be reused for toilet flushing, landscape irrigation, and other suitable non-potable applications.

For more information, visit our Grey Water Recycling page.

Wastewater recycling allows appropriately treated wastewater to be reused within a facility, helping reduce freshwater demand.

When the necessary water quality requirements are met, reclaimed water may be used for cooling, washing, and certain manufacturing processes.

The economic benefits depend on the volume of water recovered and the facility's existing water supply costs.

Yes. Suitable domestic or industrial wastewater can be treated to meet the water quality requirements of industrial processes.

Treatment technologies are selected based on the characteristics of the wastewater and the requirements of the intended reuse application.

For more information, explore our Wastewater Recycling and Process Water Production page.

Treatment capacity is determined by evaluating daily and hourly water consumption, required product water volume, operating hours, and source water characteristics.

Water storage requirements, peak demand periods, and potential future capacity expansion should also be considered during the engineering and design stages.

Yes. Regular inspection and maintenance are essential for the reliable and efficient operation of water treatment systems.

Filters, membranes, pumps, valves, measuring instruments, and automation equipment should be inspected and maintained according to manufacturer recommendations and operating conditions.

Maintenance requirements vary depending on the treatment technology and water characteristics.

To request a quotation from Rielli, you can provide information about your water source, recent water analysis results, daily and hourly treatment capacity requirements, and target product water quality.

Additional information about the available installation space, existing treatment infrastructure, and operating hours will help with the technical assessment.

For a water treatment solution tailored to your requirements, please contact Rielli.

Reliable Solutions for Sustainable Water Management

At Rielli, we develop high-efficiency water treatment and recovery systems tailored to a wide range of needs—from industrial facilities and tourism infrastructure to the maritime sector and municipal applications. We provide customized solutions at every stage, from project design and commissioning to technical support and after-sales services.